AUTOUPDATEELEMENTCIMEXTENTS

Last modified by Adam Carlson on 2021/07/05 14:38

Setting that turns on (default 1)/off (0) if sticking out CIMs should be added to the total measure or not.

AUTOUPDATEELEMENTEXTENTS overwrites this value.

AUTOUPDATEELEMENTCIMEXTENTSa.png

Example of the IMPACT default setting:

VariableTypeValue
AUTOUPDATEELEMENTCIMEXTENTS01

AUTOUPDATEELEMENTCIMEXTENTS1default.png

Example with a user default setting:

VariableTypeValue
AUTOUPDATEELEMENTCIMEXTENTS00

AUTOUPDATEELEMENTCIMEXTENTS0custom.png