AXEXPORTCIMLIFTGRPIDS
Last modified by superadmin on 2021/05/04 17:09
With AXEXPORTCIMLIFTGRPIDS you can specify which CIM groups should be considered as lift groups for the AX export (for multiple groups, use ';' as separator)
The export will count the CIMs in the elements where the CIM is defined as a Lift for the specified setting.
If "AXEXPORTCIMLIFTGRPIDS" is not used the export will consider group 2 as the default Lift group.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| AXEXPORTCIMLIFTGRPIDS | 0 | 0 (Group 2 is chosen as the default) |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| AXEXPORTCIMLIFTGRPIDS | 0 | 1;2;3 |
