DWGDIMCONTINUOUSSUPPRESSEXTLINE
Last modified by superadmin on 2021/05/04 17:14
DWGDIMCONTINUOUSSUPPRESSEXTLINE1 and DWGDIMCONTINUOUSSUPPRESSEXTLINE2 make it possible to suppress the extension line 1 or 2 for continuous dimension lines.
The default value is what you pick in the dimension style.
The setting "Use continuous dimension" must be set to "Yes"
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| DWGDIMCONTINUOUSSUPPRESSEXTLINE1 & DWGDIMCONTINUOUSSUPPRESSEXTLINE2 | 0 | 0 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| DWGDIMCONTINUOUSSUPPRESSEXTLINE1 & DWGDIMCONTINUOUSSUPPRESSEXTLINE2 | 0 | 1 |
When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run for the changed settings to take place.
The settings in Standard Admin serves as default settings when creating a new shop drawing or a new section.
After the change, the drawing must be redrawn or updated.
