DWGRECESSCUTMESH
Last modified by superadmin on 2021/05/04 17:12
Set value to 1 to set "cut reinforcement mesh" as default at the recess properties. Set value to 0 if that is not a relevant setting. Variable is set in Standard Admin tool.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| DWGRECESSCUTMESH | 0 | 1 |
INSERT PICTURE
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| DWGRECESSCUTMESH | 0 | 0 |
INSERT PICTURE