DWGTEXTDIMELEVVERTGAP

Last modified by superadmin on 2021/05/04 17:17

The distance between the generated elevation line and the dimension - Vertical.

When the variable is not added or the value is set to 0 the default value is 30. 
30 is multiplied with the scale, 50 in this case and this gives the distance 1500 mm.

With our custom value 10, the distance will be 10*50= 500 mm

Example of the IMPACT default setting:

VariableTypeValue
DWGTEXTDIMELEVVERTGAP00

0vertgap.png

Example with a user default setting:

VariableTypeValue
DWGTEXTDIMELEVVERTGAP010

1vertgap.png

When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run for the changed settings to take place.

The settings in Standard Admin serves as default settings when creating a new shop drawing or a new section.

After the change, the drawing must be redrawn or updated.

6.png

Tags:
Copyright 2024 StruSoft AB
IMPACT Wiki