NOTIFICATIONMODELDRAWINGNOTUPDATED
Last modified by Adam Carlson on 2024/08/22 10:33
This notification is fired when opening a plan/elevation drawing that isn’t updated, the possibility to call “Update Plan” or “Update Elevation”, the default value is 2.
In the picture below FP01 is written with bold text which indicates that it is not updated.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| NOTIFICATIONMODELDRAWINGNOTUPDATED | 0 | 2 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| NOTIFICATIONMODELDRAWINGNOTUPDATED | 0 | 0 |
New in (Q4/2024) Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| NOTIFICATIONMODELDRAWINGNOTUPDATED | 0 | 1 |
Note: There is a setting that needs to be ticked in Server Connect for this to work, see below.
This will make AutoCAD write out the message in the command box.
Hide notifications unticked works in the same way as if the variable was set to 2.
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| NOTIFICATIONMODELDRAWINGNOTUPDATED | 0 | 3 |
