TABLE RC/CIM/HOLE/WALLTIE/MEP KEY MIN NBR OF ROWS
The variable controls the minimum number of rows displayed in the different table of components such as reinforcement, cast-in materials, holes, wall ties, and MEP-keys.
If you want to optimize the usage of space on shop drawings, you do not want an empty row in one of the tables. By decreasing the minimum number of rows you will never have empty rows. Setting the value of the variables to 0 will display only the header of the table. If more rows are needed, e.g. if the number of cast-in materials exceeds the minimum number of rows, IMPACT will automatically increase the number of rows to make all the components fit within the table.
This variable will be added under Variables in Standard Admin. AutoCAD needs to be refreshed before the change will affect your drawings.
Figure 1: The tables of reinforcement and cast-in materials with the default minimum of rows set to 3.
Figure 2: The tables with a minimum number of rows set to 1 or 0.
Input values
| Variable | Short description | Type | Example value | Default value |
| TABLERCMINNBROFROWS | Minimum rows - RC | 0 | A number | 3 |
| TABLECIMMINNBROFROWS | Minimum rows - CIM | 0 | A number | 3 |
| TABLEHOLEMINNBROFROWS | Minimum rows - Hole | 0 | A number | 3 |
| TABLEWALLTIEMINNBROFROWS | Minimum rows - Wall tie | 0 | A number | 1 |
| TABLEMEPKEYMINNBROFROWS | Minimum rows - MEP-key | 0 | A number | 1 |