VPORTMARGIN
Last modified by Adam Carlson on 2022/11/30 12:44
Determines the distance to the margin for viewports. Note: This does not affect views 4,5,6 & 7.
A larger value makes the margin larger and a smaller number, down to 0, makes the margin smaller.
Note: Don't set the value to 0 as it may cut out some of the measurements.
To be the change even more noticeable, combine with the variable DWGVPORTSCALETOFITROUNDOFF
To change the views 4,5,6 & 7, check RCVIEWVPORTMARGIN
Example with a higher value:
Variable | Type | Value |
---|---|---|
VPORTMARGIN | 0 | 5 |
Example with a lower value:
Variable | Type | Value |
---|---|---|
VPORTMARGIN | 0 | 0.2 |
See the GIF below: