BRACECOLUMNWIDTHDOUBLEWALL
The maximum width of concrete that results in a centric placement of the bracing, default 1000 mm.
If there is an opening placed closer than the value defined, default 1000 mm, the bracing will be placed in the middle between the edge of the doublewall and the edge of the opening.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
BRACECOLUMNWIDTHDOUBLEWALL | 0 | 1000 |
In the first picture, the window is drawn but not added yet and it is placed 671 mm from the edge which will trigger the bracing to be placed in between the window and the edge.
Example with a user default setting:
Variable | Type | Value |
---|---|---|
BRACECOLUMNWIDTHDOUBLEWALL | 0 | 500 |
In this example, the value is set to 500 and the distance from the wall to the edge of the window is 700 mm.
In this case, another variable is responsible for the value the bracing is offset, BRACEEDGEDISTANCEDOUBLEWALL, with the default value of 150 mm