PLOTGIRDERINPANEL2DOUBLEWALL

Last modified by superadmin on 2021/05/04 17:08

Controls if the girders should be seen in panel 2.
Note, this only works for IMPACT for Revit and not for IMPACT for CAD since version 16. It is now controlled from the "Layer Standard" for IMPACT for CAD.

Which layer standard is used can be seen in the Project Properties as seen below. In this case "Standard" is used.

44444.png

In Standard Admin the user can tick and untick if the layer should be plotted or not. 

55555.png

The Revit part of this can be adjusted with the variable as presented below.

Example of the IMPACT default setting:

VariableTypeValue
PLOTGIRDERINPANEL2DOUBLEWALL00

Revit - DW_0.png

Example with a user default setting:

VariableTypeValue
PLOTGIRDERINPANEL2DOUBLEWALL01

Revit - DW_1.png

Tags:
Copyright 2024 StruSoft AB
IMPACT Wiki