_uElevationLineElev
Last modified by Adam Carlson on 2022/01/20 14:08
Introduction
This block shows the elevation line on the elevation drawing.
How the block works
There can be multiple elevations in one elevation drawing, to set the elevations apart this block states the name and the description, and the level on the given elevation.
The block contains only two attributes.
The block itself looks like this
Attribute
These are the default attributes that are used for this block.
These are also the only attributes that can be present.
Attribute | Description |
ELEVATION | |
DESCRIPTION |
The Block
The block is located under ...\Standard\1100\1100\templates_drawings. 1100 must be replaced with your company number.
If the block is not needed, the dwg can be removed from the folder and it will not be shown.