_uelectrkey
Introduction
This block is used to show the electrical installations (MEP-Key) in elements on plan drawings.
How the block works
Adding an electrical key to an element, in other words, MEP key, is shown with the symbol below.
The block contains only one attribute, that is the name of the MEP key
The block itself looks like this
There is also an alternative called "_uelectrkey1". To use this symbol instead, remove the "1" and rename the upper block.
Attributes
This is the default attribute that is used for this block.
This is also the only attribute that can be present.
Attribute | Description |
IMP_EKEY_NAME |
The Block
The block is located under ...\Standard\1100\1100\templates_drawings. 1100 must be replaced with your company number.
If the block is not needed, the dwg can be removed from the folder and it will not be shown.