_uh_001

Last modified by Adam Carlson on 2022/03/09 10:32

Introduction

This block is used to show the properties of an element on drawings.

The standard name of the block is _uh_001, this name can be changed.

How the block works

This is what the standard Strusoft block looks like in a drawing.

33333333.png

The block itself looks like this.

2222222.png

Attributes

The attributes that can be used with this block will be presented below.

Attributes have to be created similar to the picture below.

1626780343810-185.png

When editing an attribute, "Tag" is the attribute name from the tables below and "Prompt" is the description for the attribute if that is desired.

Attributes that can be used for this block

These attributes can be used for this block.

AttributeDescription
ELEMENT_DESCRIPTION 
NO_PIECES_READY_FOR_PRODUCTION 
BOUNDING_BOX_AREA_M2 
ELEMENT_MARK 
MASS_T 
VOLUME_M3 
FACTORY 
PROJECT 
DRAWING 
SLAB_THICKNESS 
DESIGNED_BY 
DRAWING_SCALE 
DRAWING_STATUS 
PRELIMINARY_DATE 
DRAWING_TYPE 
STYLE 
ELEMENT_TYPE 
PRODUCT 
MATERIAL_CODE 
MASS_KG 
NET_AREA 
GROSS_AREA 
VOLUME 
VOLUME_L 
IMP_MATERIAL_NAME 
IMP_MATERIAL_DESCRIPTION 
IMP_ELEMENT_THICKNESS 
NO_PIECES 
ELEMENT_MARK_CHANGED_DATE 

BUILDING

 

FLOOR

 

ELEMENT_ID

 

MASS

 

PHASE

 

LENGTH

 

WIDTH

 

HEIGHT

 

The Block

The block is located under ...\Standard\1100\1100\templates_drawings. 1100 must be replaced with your company number. 

If the block is not needed, the dwg can be removed from the folder and it will not be shown.

Download the block

Tags:
Copyright 2024 StruSoft AB
IMPACT Wiki