ElevationTopDoubleWall
Last modified by Adam Carlson on 2022/01/20 14:10
Introduction
This block is used to show the elevation at the top of the doublewall.
How the block works
This is how the standard Strusoft block looks like in a drawing.
The block itself looks like this:
Attributes
This is the default attribute that is used for this block.
This is also the only attribute that can be present.
Attribute | Description |
ELEVATION_M_CM_U |
The Block
The block is located under ...\Standard\1100\1100\templates_drawings. 1100 must be replaced with your company number.
If the block is not needed, the dwg can be removed from the folder and it will not be shown.