_dw_rc_panel
Last modified by Adam Carlson on 2022/01/20 14:12
Introduction
These blocks show the reinforcement panel for panel 1 and panel 2 for doublewalls on shop drawings.
How the block works
Doublewall have 2 separate panels linked with girders, the reinforcement view is distinguished by the blocks _dw_rc_panel1 and _dw_rc_panel2 shown in the picture below.
The blocks don't contain any attributes.
The blocks themselves look like this:
_dw_rc_panel1
_dw_rc_panel2
The Block
The block is located under ...\Standard\1100\1100\templates_drawings. 1100 must be replaced with your company number.
If the block is not needed, the dwg can be removed from the folder and it will not be shown.