_uRightSideSymbolColumn

Last modified by Adam Carlson on 2022/03/03 12:56

Introduction

This block is used to show the right side of a column with a number on shop drawings. 

The standard name of the block is _uRightSideSymbolColumn, this name can not be changed.

How the block works

This is what the standard Strusoft block looks like in a drawing.

_uRightSideSymbolColumn2.png

_uRightSideSymbolColumn1.png

The block contains no attributes.

The block itself looks like this:

2022-03-03 12_54_48-AutoCAD Architecture 2022 - [_uRightSideSymbolColumn.dwg].png

The Block

The block is located under ...\Standard\1100\1100\templates_drawings. 1100 must be replaced with your company number. 

If the block is not needed, the dwg can be removed from the folder and it will not be shown.

Download the block

Tags:
Copyright 2024 StruSoft AB
IMPACT Wiki