DWGTEXTFSRCOVERLAP

Last modified by superadmin on 2021/05/04 17:13

Text and values that write out when reinforcement bars are sticking out on the short side of the formslab. 

To have reinforcement bars stick out from the short side of the element the fields "Distance cut left/right" can be filled with a minus sign in front of it. 

The default is set to "Overlap %.0lf mm". "%.0lf" will show the value with zero decimals. If more decimals are preferable, the term can be written as "%.3lf" which will give three decimals. 

DWGTEXTFSRCOVERLAP2.png

Example of the IMPACT default setting:

VariableTypeValue
DWGTEXTFSRCOVERLAP0Overlap %.0lf mm

DWGTEXTFSRCOVERLAP0.png

Example with a user default setting:

VariableTypeValue
DWGTEXTFSRCOVERLAP0WIKIOverlap %.0lf mm

DWGTEXTFSRCOVERLAP1.png