Sets the minimum width when drawing form slabs

The default is 10. The form slab in the example below is drawn with a width of 150 mm. The form slab is drawn when the default value is 10 mm but not when the custom value is set to 200 mm. 

Example of the IMPACT default setting:

VariableTypeValue
MINWIDTHFORMSLABINSULATION010

MINWIDTHFORMSLAB1.png

Example with a user default setting:

VariableTypeValue
MINWIDTHFORMSLABINSULATION0200

MINWIDTHFORMSLAB2.png

 

Tags:
Copyright 2022 StruSoft AB
IMPACT Documentation