AWAY SYMBOL SIZE
With the variable AWAY_SYMBOL_SIZE, the default size of the away symbol can be set for a reinforcement group drawn in a shop drawing and for a reinforcement column/beam when it is drawn in the elevation view. Can also be seen in the reinforcement group view 30.
This variable will be added under Reinforcement/Default in Standard Admin. AutoCAD needs to be refreshed before the change will affect your drawings.
When the variable is not present the default value will be 3*drawing scale, in this case 3*30=90 mm.
The custom value is here chosen to 6 which will be 6*drawing scale, 6*30=180 mm.
When the value is set to 0, the away symbol will be shown in real size, depending on the stirrup dimension. In this case, it will have the dimension 6 mm.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
AWAY_SYMBOL_SIZE | 0 | No variable (3*drawing scale) |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
AWAY_SYMBOL_SIZE | 0 | 6 |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
AWAY_SYMBOL_SIZE | 0 | 0 |