BARMARK STIRRUP
BARMARK_STIRRUP is defining how the automatic marking of stirrups shall be made for walls. These macros can be added together like this example $SHAPE$NR[100].
This variable will be added under Reinforcement/Default in Standard Admin. AutoCAD needs to be refreshed and closed down before the change will affect your drawings.
Available macros. Any number or letters can also be added in addition to the following macros.
MACRO | Description |
$LEN | Cut length of the bar |
$NR[1] | Number to start with |
$SHAPE | Shape code |
$DIM | Diameter |
In order for this to take on another value, there must be a change triggered in the reinforcement template and the template proposal needs to be drawn again.
In the default example, 9 barmark have been used and the next one is 10.
In the user example, 19 barmark have been used and the next one is 20+100=120.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
BARMARK_STIRRUP | 0 | $SHAPE$NR[1] |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
BARMARK_STIRRUP | 0 | $SHAPE$NR[100] |