DWGRCMESHSYMBOLTYPE
Last modified by superadmin on 2021/05/04 17:28
Switch between how the mesh should be presented as a symbol. Can be either 0 (not added) or 1.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
DWGRCMESHSYMBOLTYPE | 0 | 0 |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
DWGRCMESHSYMBOLTYPE | 0 | 1 |
When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run for the changed settings to take place.
For this setting to take place, AutoCAD needs to be restarted.