DWGSHOWCROSSMARKOPENINGSRCVIEW
Last modified by superadmin on 2021/05/04 17:08
Adding this variable and setting its value to 1, cross marks will be drawn in openings of the RC view.
DWGSHOWCROSSMARKOPENINGSRCVIEW controls cross marks on the reinforcement view of shop drawings.
A similar variable is for geometry views on shop drawings, you can see that here DWGSHOWCROSSMARKOPENINGS.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
DWGSHOWCROSSMARKOPENINGSRCVIEW | 0 | 1 |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
DWGSHOWCROSSMARKOPENINGSRCVIEW | 0 | 0 |
When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run for the changed settings to take place.
The settings in Standard Admin serves as default settings when creating a new shop drawing or a new section.
Once a section is created it will have its own settings which can be different from setting in Standard Admin.