DWGSHOWMESHDESCRIPTIONINSECTION

Last modified by superadmin on 2021/05/04 17:12

This variable controls if the mesh description is visible on the section in the shop drawing. By setting DWGSHOWMESHDESCRIPTIONINSECTION to the value 1, the mesh description is shown under the mesh name in the section.
By setting this to 0, the mesh name is visible and not the description. 

Example of the IMPACT default setting:

VariableTypeValue
DWGSHOWMESHDESCRIPTIONINSECTION01

1595497791027-899.png

Example with a user default setting:

VariableTypeValue
DWGSHOWMESHDESCRIPTIONINSECTION00

1595497845860-201.png

When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run for the changed settings to take place. 

The settings in Standard Admin serves as default settings when creating a new shop drawing or a new section.

Once a section is created it will have its own settings which can be different from setting in Standard Admin.

1594992838280-598.png

 

Tags:
Copyright 2024 StruSoft AB
IMPACT Wiki