FS_RC_PRIMARY_DIAMETER_LIST
Last modified by AdamCarlson on 2021/05/31 15:55
Either all the diameters can be shown (default) when "Minimum AS" is selected or just the ones that are defined in the variable.
This applies to the primary reinforcement diameter list.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| FS_RC_PRIMARY_DIAMETER_LIST | 0 | 0 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| FS_RC_PRIMARY_DIAMETER_LIST | 0 | 8;10;12 |
