GROUP DEFAULT MATERIAL
Last modified by AdamCarlson on 2021/06/14 11:18
GROUP_DEFAULT_MATERIAL controls if a specific material should be the default for filling when drawing reinforcement groups instead of <none>.
This variable will be added under Reinforcement/Default in Standard Admin. AutoCAD needs to be refreshed before the change will affect your drawings.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| GROUP_DEFAULT_MATERIAL | 0 | 0 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| GROUP_DEFAULT_MATERIAL | 0 | Mineral Wool |
