GROUP_MTO_PARTS
Last modified by superadmin on 2021/05/04 17:12
The value set to 1 = all bars in reinforcement groups are included in the material take-off, 0 = only the group is included (default).
0 - Only the reinforcement group will be included in the MTO. Separate bars will not show in the schedule nor in reports.
1 - All bars inside reinforcement groups will be included when doing MTO:s. They will be displayed as individual pieces, alongside the groups in reinforcement tables and schedules and will be printed in reports.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
GROUP_MTO_PARTS | 0 | 0 |
Before the reinforcement group is added.
After the reinforcement group is added.
Example with a user default setting:
Variable | Type | Value |
---|---|---|
GROUP_MTO_PARTS | 0 | 1 |
Before the reinforcement group is added.
After the reinforcement group is added.