GROUP STIRRUP IN RC SCHEDULE

With GROUP_STIRRUP_IN_RC_SCHEDULE, the user can decide if the stirrups in the Reinforcement groups shall be shown in the bending schedule. 

This variable will be added under Reinforcement/Default in Standard Admin. AutoCAD needs to be refreshed before the change will affect your drawings. This variable will only work if GROUP_MTO_PARTS is enabled. 

Figure 1: Bar mark for stirrups in Reinforcement group. 

Example of the IMPACT default setting:

Figure 2: Bar bending schedule with stirrups excluded.

Example with a user default setting:

Figure 3: Bar bending schedule with stirrups included.