HCS_RECESS_BAR
Last modified by superadmin on 2021/05/04 17:29
Automatic reinforcement if there is a recess that cuts away a piece that is 400 mm or larger of the width of the slab (calculated on the bottom width).
"0" or "1" meaning Off or On.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| HCS_RECESS_BAR | 0 | 0 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| HCS_RECESS_BAR | 0 | 1 |
