HCS_RECESS_BAR_DIAMETER
Last modified by superadmin on 2021/05/04 17:29
The steel diameter to use (needs to be defined in the drawing) if there is a recess that cuts away a piece that is 400 mm or larger of the width of the slab (calculated on the bottom width).
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| HCS_RECESS_BAR_DIAMETER | 0 | 10 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| HCS_RECESS_BAR_DIAMETER | 0 | 20 |
