HCS_RECESS_BAR_QUALITY
Last modified by superadmin on 2021/05/04 17:15
The steel quality to use (needs to be defined in the drawing) if there is a recess that cuts away a piece that is 400 mm or larger than the width of the slab (calculated on the bottom width).
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| HCS_RECESS_BAR_QUALITY | 0 | - |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| HCS_RECESS_BAR_QUALITY | 0 | R |
