MEP_KEY_RECESS_CUTS_BARMESH

Last modified by Adam Carlson on 2021/06/21 13:21

Set if recesses in MEP-Keys should cut bar mesh (1 default) or not (0).

When the value for the variable is changed, AutoCAD needs to be refreshed with "Refresh settings and properties" and "Generate Bar Mesh, Slab, Wall, Sandwich" needs to be run.

MEP_KEY_RECESS_CUTS_BARMESHa.png

Example of the IMPACT default setting:

VariableTypeValue
MEP_KEY_RECESS_CUTS_BARMESH01

MEP_KEY_RECESS_CUTS_BARMESH1anddefault.png

Example with a user default setting:

VariableTypeValue
MEP_KEY_RECESS_CUTS_BARMESH00

MEP_KEY_RECESS_CUTS_BARMESH0.png