MTO_HIDE_BENDED_MESH
Last modified by superadmin on 2021/05/04 17:28
Controls whether or not to display bended meshes in the table of reinforcement. MTO_HIDE_MESH is overwriting this variable.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| MTO_HIDE_BENDED_MESH | 0 | 0 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| MTO_HIDE_BENDED_MESH | 0 | 1 |
