MTO_SUPPRESS_DEFINITIONS
Last modified by Adam Carlson on 2021/04/08 10:43
MTO_SUPPRESS_DEFINITIONS controls if the shape code should be written in front of the barmark in the table of reinforcement. When set to 1, it shows only the barmark/length of the bar.
This variable will be added under Reinforcement/Default in Standard Admin. AutoCAD needs to be refreshed before the change will affect your drawings.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| MTO_SUPPRESS_DEFINITIONS | 0 | 0 (No variable) |
Shape code and barmark presented
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| MTO_SUPPRESS_DEFINITIONS | 0 | 1 |
Bar mark presented