SUPPRESS_CUTTING_BAR_FS
Last modified by AdamCarlson on 2021/06/24 11:53
If it is set to 1 then the straight bars will not be cut for holes even if this is selected in the hole-menu. Default 0
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| SUPPRESS_CUTTING_BAR_FS | 0 | 0 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| SUPPRESS_CUTTING_BAR_FS | 0 | 1 |
