USE_CENTER_LINE_FOR_RC_AREA_FORMSLAB
Last modified by Oskar Kristinsson on 2025/11/18 10:24
Add a new possibility for calculating the actual reinforcement area for FormSlab called centerline
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| USE_CENTER_LINE_FOR_RC_AREA_FORMSLAB | 0 | 0 |
When this setting is disabled, all reinforcement bars in both directions are considered, and the actual reinforcement area is calculated for each direction individually.
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| USE_CENTER_LINE_FOR_RC_AREA_FORMSLAB | 0 | 1 |
When this setting is enabled, all reinforcement bars crossing the center line in both directions are considered, and the actual reinforcement area is calculated for each direction individually.
| AS1 | ||||||
| Diameter | Area of one bar (mm2) | Amount of bars | Total area (mm2) | Total area (cm2) | Length of element (m) | AS1 (cm2/m) |
| 12 | 113,0973 | 12 | 1357,1680 | 13,5717 | 2,4 | 5,6549 |
| AS2 | ||||||
| Diameter | Area of one bar (mm2) | Amount of bars | Total area (mm2) | Total area (cm2) | Length of element (m) | AS1 (cm2/m) |
| 8 | 50,2655 | 28 | 1407,4335 | 14,0743 | 3,83 | 3,6748 |