Drawing Types

Last modified by Peter Karlsson on 2019/03/11 08:55

 

Here, you can create new drawing types from scratch or copy an existing one to make a new. For every drawing type you have properties to defining it.

DT prop.gif

Figure 1: Drawing types properties

1523275279569-560.png

Figure 2: Drawing types properties

In the properties dialog you give the drawing type a describing name and you define which block you like to use as a specification for the drawing. Here, you also define the size  insertion point of the block.

1523275371534-149.png

Figure 3: Size of block

The specification consists of an AutoCAD block in scale 1:1 with attributes. The block is placed in the folder … \common\1100\1100\templates_drawings. If there is a block with the same name in …\common\1101\1101\templates_drawings that will be used instead.

You are also defining which drawing head that shall be used for the drawing type (in the example above _uh_001.dwg). The drawing head is always placed in the upper right corner of the drawing.
1523275457818-101.png

Figure 4: Size of drawing head

The drawing head is placed in the folder …\common\1100\1100\templates_drawings.
The attribute values that are available for presenting in the drawing head, the drawing panel or the drawing specification are according to the following table.

OFFICIAL

UNOFFICIAL

All Drawings

 

FACTORY

FABRIKSKONTO

PROJECT

ORDERNR

DRAWING

RITNR

TEXT_1

RITNING_TEXT1

TEXT_2

RITNING_TEXT2

TEXT_3

RITNING_TEXT3

TEXT_4

RITNING_TEXT4

TEXT_5

RITNING_TEXT5

TEXT_6

RITNING_TEXT6

DESIGNED_BY

RITARE

DESIGNED_DATE

 

CHECKED_BY

HANDLAGGARE

APPROVED_BY

 

APPROVED_DATE

RITNING_RITNING_DATUM

DRAWING_SCALE

SCALE

DRAWING_SHEET

 

DRAWING_STATUS

STATUS

PRELIMINARY_DATE

STATUS_DATUM

DRAWING_TYPE

 

DRAWING_REVISION

REV

SALES_PROJECT 
PROJECT_MANAGER 

 

 

All Shop Drawings

 

ELEMENT_MARK

LITTERA

STYLE

 

GROUP

PRODUKTGRUPP

ELEMENT_TYPE

 

ELEMENT_DESCRIPTION

ELEMENT_TYPBETECKNING

PRODUCT

 

MATERIAL_CODE (not sandwich or double wall)

 

LENGTH

 

WIDTH

 

HEIGHT

ELEMENT_THICKNESS

MASS

ELEMENT_VIKT

MASS_T

ELEMENT_VIKT

MASS_KG

 

NET_AREA

NETTO_AREA

GROSS_AREA

 

BOUNDING_BOX_AREA_M2

 

VOLUME, VOLUME_L (liter)

VOLYM

VOLUME_M3 (m3)

 

IMP_MATERIAL_NAME

 

IMP_MATERIAL_DESCRIPTION

 

IMP_ELEMENT_THICKNESS

 

NO_PIECES

ELEMENT_ANTAL

NO_PIECES_READY_FOR_PRODUCTION

 

FLOOR

 

BUILDING

 

PHASE

 

TRANSPORT_ID

 

ELEMENT_ID

 

ELEMENT_MARK_CHANGED_DATE 

 

 

Sandwich

 

VOLUME_INNER_PANEL

VOLYM_ISKIVA

VOLUME_OUTER_PANEL

VOLYM_YSKIVA

VOLUME_INNER_PANEL_L

VOLYM_ISKIVA

VOLUME_OUTER_PANEL_L

VOLYM_YSKIVA

VOLUME_INNER_PANEL_M3

 

VOLUME_OUTER_PANEL_M3

 

MASS_INNER_PANEL

VIKT_ISKIVA

MASS_OUTER_PANEL

VIKT_YSKIVA

MASS_INNER_PANEL_T

VIKT_ISKIVA

MASS_OUTER_PANEL_T

VIKT_YSKIVA

MASS_INNER_PANEL_KG

 

MASS_OUTER_PANEL_KG

 

VOLUME_INSULATION_M3

 

VOLUME_INSULATION_L

 

IMP_MATERIAL_NAME_INNER

 

IMP_MATERIAL_NAME_INSULATION

 

IMP_MATERIAL_NAME_OUTER

 

IMP_MATERIAL_DESCRIPTION_INNER

 

IMP_MATERIAL_DESCRIPTION_INSULATION

 

IMP_ELEMENT_THICKNESS_INSULATION

 

IMP_MATERIAL_DESCRIPTION_OUTER

 

 

 

Hollow Core

 

ENDCAP_LEFT_NAME

 

ENDCAP_RIGHT_NAME

 

ENDCAP_LEFT_DESCRIPTION

 

ENDCAP_RIGHT_DESCRIPTION

 

ENDCAP_LEFT_PROPERTIES

 

ENDCAP_RIGHT_PROPERTIES

 

 

 

Double Wall

 

VOLUME_PANEL1

VOLYM_SIDA1

VOLUME_PANEL1_L

VOLYM_SIDA1

VOLUME_PANEL1_M3

 

VOLUME_PANEL2

VOLYM_SIDA2

VOLUME_PANEL2_L

VOLYM_SIDA2

VOLUME_PANEL2_M3

 

MASS_PANEL1

VIKT_SIDA1

MASS_PANEL1_T

VIKT_SIDA1

MASS_PANEL1_KG

 

MASS_PANEL2

VIKT_SIDA2

MASS_PANEL2_T

VIKT_SIDA2

MASS_PANEL2_KG

 

WIDTH_PANEL1

 

WIDTH_PANEL2

 

IMP_MATERIAL_NAME_PANEL_1

 

IMP_MATERIAL_NAME_PANEL_2

 

IMP_MATERIAL_DESCRIPTION_PANEL_1

 

IMP_MATERIAL_DESCRIPTION_PANEL_2

 

IMP_RC_MESH_COVER_PANEL_1

 

IMP_RC_MESH_COVER_PANEL_2

 

 

 

Form Slab

 

SLAB_RC_BAR_COVER

 

SLAB_RC_STRAND_COVER

 

SLAB_RC_MESH_COVER

 

SLAB_THICKNESS

 

AS1

 

AS2

 

 Table 1: Drawing specifications

For the drawing specification, the user can define own values, which is described in Specifications.
The values that are available can then be assigned to the particular drawing type.

Fields and options

It’s also possible to set up choice list for the fields for each drawing type. Fields are custom attributes which can be used in drawing panels/heads.These fields are also accessible in Project Manager.

fields.gif

Figure 4: Fields in Standard Admin and Project Manager

Under "Options", you can set up choices for the fields for each drawing type.

1523278198789-912.png

Figure 5: Options in Standard Admin

options.gif

Figure 6: Options in Project Manager

Tags:
Created by Linus Karlsson on 2018/04/09 14:00
Copyright 2018 StruSoft AB
Impact Documentation