Element Types

Last modified by Linus Karlsson on 2018/04/09 10:42

In this grid, you can select which drawing type that shall be standard for each element type. You can also type in default Endcap prefix and if the element type shall be visible or not. Drawing type and element type is separated which means that you can generate a Wall element on a drawing type for a ledged beam.

The element type linked and linked Prestressed are element types were the geometry is handled by the user.

1523263048993-995.png

Figure 1: Element Types grid 

 

Tags:
Created by Linus Karlsson on 2018/04/09 10:37
Copyright 2018 StruSoft AB
Impact Documentation