Materials

Last modified by Adam Carlson on 2019/02/07 15:46

In this grid, you can set all the different types of materials that you are going to use in IMPACT. The technical data you can set is "Density", how the material will look like when rendered ("Material Type"), Weight" and how the material will look like when shaded ("R", "G" and "B"). 

1523264242764-487.png

Figure 1: Grid for Materials

The mass of an element is calculated with the volume multiplied by the density.

1523264741947-685.png

Figure 2: The mass of an element is displayed in the drawing head

1523264642944-286.png

Figure 3: You can get an elements mass by holding the mouse pointer on the element

The weight of an element is multiplied as the volume multiplied by the weight.

You cannot insert the weight in the drawing head but, it’s possible to present it in a report.

Color

It is possible to set how a material will appear, both when rendered and shaded. 

1523266339278-438.png

Figure 4: Rendered and shaded appearance 

To set the shaded color to a material, you need to choose a color and get the values for red, green and blue (RGB-value). Insert the RGB in the columns "R", "G" and "B". 

Hatch pattern

It is possible to define custom hatch patterns for materials in IMPACT. The pattern will be drawn on shop drawings where the material is presented. First, find the pattern you want to use by starting the hatch command in AutoCAD, as shown in the animation below...

select_hatch_pattern.gifFigure 5: Hatch pattern command in AutoCAD

Next, you'd want to find and open the file named acad.pat . This file contains all browseable hatch patterns in AutoCAD...

1523271864715-270.png

Figure 6: Pattern file where the hatch patterns in Autocad are listed

Open the file and find the pattern you want to use, in this example we will use the Honeycomb pattern

Honey.gif

Figure 7: File where hatch patterns are listed

Copy the marked text into a new text file. Change the information in the top line from *Honey, Honeycomb pattern to match the name of the material that you want to use the pattern with. In this example, we'll change the text to *Polystyrene, Polystyrene pattern. The material in IMPACT Standard Admin is named Polystyrene.  

polystyrene.gif

Figure 8: Edit information in the text file

NOTE: A blank line must be placed after the last hatch pattern definition in a PAT file. If a blank line is not placed after the last hatch pattern definition, the last hatch pattern definition will not be accessible when creating a hatch fill. 

Save the file to the standard directory. In this case it's: …common\1100\1100\templates_drawings.

It is important that the name of the hatch pattern is the same as the name of the material one wants to use it for.

Hatch patterns to download

We have some predefined hatch pattern example that can be downloaded using the links below. There is also a preview of the pattern below the link.

Polystyrene.pat

1523273766636-431.png

Figure 9: Polystyrene hatch pattern

Mineral_Wool.pat

1523273772439-860.png

Figure 10: Mineral Wool hatch pattern

Change the scale of a filling hatch

If you have a wall and add a filling to it with a hatch, it will automatically get the same scale as the drawing itself. The scale can then be changed on 3 levels, the drawing itself, local or common.   

On the drawing, you double-click on the hatch and change the scale there. ​​​​​​​The scale was 30 on the drawing. 

Asdefaultdrawingscale1.png

Figure 11: Hatch scale 30

The local and common settings are changed in standard admin under variables. The variable is beginning by the material you choose e.g. LAC. The variable for LAC will then be LAC_FILLING_SCALE. There you can set the scale under Value.

material_filling_scale2.png

Figure 12: Standard Admin variables

Next, you return to the drawing and refresh the settings, Base -> Refresh settings and properties.

refreshafterchange3.png

Figure 13: Refresh settings and properties

Lastly, you redraw the drawing and the adjusted scale is set, Element -> Draw Element. 

drawelementafterchange4.png

Figure 14: Draw Element

The result should look like this.

thenewscaleisset5.png

Figure 15: Hatch scale 5

Tags:
Created by Linus Karlsson on 2018/04/09 10:57
Copyright 2018 StruSoft AB
Impact Documentation