DWGDIMFLOORPLANCUTSLAB
Last modified by Adam Carlson on 2021/07/05 09:43
Enables a dimension of the width of the slab to be drawn inside the element when the width of the slab is less than the width specified in its definition.
You can also control which dimension style should be used with "DWGDIMFLOORPLANCUTSLABDIMSTYLE", default "IMPACT28"
In this example, 2400 mm is set as the width of the slab and the slab drawn is 2000 mm which is less than 2400 mm.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| DWGDIMFLOORPLANCUTSLAB | 0 | 0 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| DWGDIMFLOORPLANCUTSLAB | 0 | 1 |
