When you are only having 2 sections in a slab element on the shop drawing, there is no lettering to indicate the sections. 
With DWGSHOWSINGLESECTIONNAMESLAB set to 0 as standard the letters are missing and will only show up when there are more than 2 sections but with DWGSHOWSINGLESECTIONNAMESLAB set to 1, you get the sections defined with letters.

Example of the IMPACT default setting:

VariableTypeValue
   

1595506763207-652.png

Example with a user default setting:

VariableTypeValue
   

1595506863290-348.png

When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run for the changed settings to take place. 

The settings in Standard Admin serves as default settings when creating a new shop drawing or a new section.

Once a section is created it will have its own settings which can be different from setting in Standard Admin.

1594992838280-598.png

Tags:
Created by Oskar Kristinsson on 2020/07/23 14:19
Copyright 2020 StruSoft AB
IMPACT Documentation