DWGTEXTCONNECTIONRECESSWIDTH
Last modified by superadmin on 2021/05/04 17:13
The recess is configured in the hollowcore definition under the tab "Recess".
The macros that can be used with the variable are:
$S = Side
$D = Diameter
$R = Radius
$H = Height or countersinking
The "Connection Recess" must be drawn on the shop drawing for this to be shown.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| DWGTEXTCONNECTIONRECESSWIDTH | 0 | R %%c$D |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| DWGTEXTCONNECTIONRECESSWIDTH | 0 | WIKI $S %%c$D $R $H |
