DWGTEXTHCSENDCAPCUTOUT
Last modified by superadmin on 2021/05/04 17:28
Text on the dimension line for a cut out in the endcap.
If you have DWGTEXTCHASE & DWGTEXTTHROUGH written and they are custom in standard admin, these will show if DWGTEXTHCSENDCAPCUTOUT is not filled in.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
DWGTEXTHCSENDCAPCUTOUT | 0 | R TC |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
DWGTEXTHCSENDCAPCUTOUT | 0 | WIKICutout |
Example with a user default setting (DWGTEXTCHASE & DWGTEXTTHROUGH):
Variable | Type | Value |
---|---|---|
DWGTEXTHCSENDCAPCUTOUT | 0 | 0 |
When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run for the changed settings to take place.
The settings in Standard Admin serves as default settings when creating a new shop drawing or a new section.
After the change, the drawing must be redrawn or updated.