DWGTEXTHCSENDCAPHOLETOP1
This variable applies to the following attributes.
"ENDCAP_LEFT_PROPERTIES_1"
"ENDCAP_RIGHT_PROPERTIES_1"
With the help of different variables, you can add a text string and the following symbols, $A $B $L1 $L2 $L3 $L4 $C, to get some additional information.
$A, $B, $L1, $L2, $L3 & $L4 are taking the length from the endcap definition, and $C writes out which cores are affected.
When "Hole + Top" is selected then all of the symbols can be selected, $A $B $L1 $L2 $L3 $L4 $C. Therefore the custom name can include a name and some/all of the chosen symbols.
This endcap was placed on the left which triggered "ENDCAP_LEFT_PROPERTIES_1"
DWGTEXTHCSENDCAPHOLETOP works the same way and the attribute that is trigged is called "ENDCAP_LEFT_PROPERTIES"
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
DWGTEXTHCSENDCAPHOLETOP1 | 0 | 0 |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
DWGTEXTHCSENDCAPHOLETOP1 | 0 | WIKIEndht1 $A $B $L1 $L2 $L3 $L4 $C |