DWGTEXTHCSENDCAPNONE1

Last modified by Oskar Kristinsson on 2021/07/21 08:49

This variable applies to the following attributes.

"ENDCAP_LEFT_PROPERTIES_1"
"ENDCAP_RIGHT_PROPERTIES_1"
 

With the help of different variables, you can add a text string and the following symbols, $A $B $L1 $L2 $L3 $L4 $C, to get some additional information.

$A, $B, $L1, $L2, $L3 & $L4 are taking the length from the endcap definition, and $C writes out which cores are affected. 

When "none" is selected then none of the symbols are included. Therefore the custom name only includes a name and not the symbols.

This endcap was placed on the left which triggered "ENDCAP_LEFT_PROPERTIES_1"

DWGTEXTHCSENDCAPNONE works the same way and the attribute that is trigged is called "ENDCAP_LEFT_PROPERTIES"

Example of the IMPACT default setting:

VariableTypeValue
DWGTEXTHCSENDCAPNONE100

dwgnone001.png

Example with a user default setting:

VariableTypeValue
DWGTEXTHCSENDCAPNONE10WIKIEndcn1

dwgnone011.png

Tags:
Copyright 2024 StruSoft AB
IMPACT Wiki