Specifications

Last modified by Adam Carlson on 2024/08/02 11:26

Specifications consist of Group and Fields. 

1.png

The Group is the main level and each group can contain several fields which will be presented below. An example of a group can be 4, Cover of Concrete

2.png

The Fields are options that are shown within the group category. The group mentioned earlier, 4, Cover of Concrete, have three options added:

  • COVER_EXTERNAL
  • COVER
  • COVER_INTERNAL

These belong to the group because of the ID being 4 and the Group having number 4

3a.png

How to apply it in the Drawing Types can be read from the chapter Specifications by clicking here.

Field types available today are: 

  • Erection Strength
  • Exposure Class 1
  • Exposure Class 2
  • Lifting Angle Erection
  • Lifting Angle Production
  • Lifting Method Erection
  • Lifting Method Production
  • Stripping Strength
  • Surface Material
  • Surface Treatment

New in (Q3/2024)

  • Concrete Strength 1
  • Concrete Strength 2
  • Cement Type 1
  • Cement Type 2
  • W/C-PC 1
  • W/C-PC 2
  • W/C-SCM 1
  • W/C-SCM 2
  • Cover of Concrete 1
  • Cover of Concrete 2
  • Air Content 1
  • Air Content 2
  • Cover Tolerance
  • Service Life Class

morefieldtypes1.png