AUTOEXPORTUNITECHNIKSOLIDWALL

Last modified by AdamCarlson on 2023/02/22 13:12

The variables below all work the same. Therefore this article covers all of them.

  • AUTOEXPORTUNITECHNIKINSULATEDWALL
  • AUTOEXPORTUNITECHNIKPRESLAB
  • AUTOEXPORTUNITECHNIKSANDWICH
  • AUTOEXPORTUNITECHNIKSOLIDSLAB
  • AUTOEXPORTUNITECHNIKSOLIDWALL

With this setting turned on IMPACT will export a Unitechnik file automatically on the following commands:

  • All the MTO commands in the element tab except "Save Symbols"
  • Generate shop drawing
  • Batch generate
  • Draw element

The file will be generated to the location setup in the library structure. The element doesn't have to be set as ready for production for the automatic export to occur. 

Example of the IMPACT default setting:

VariableTypeValue
AUTOEXPORTUNITECHNIKSOLIDWALL00

Example with a user default setting:

VariableTypeValue
AUTOEXPORTUNITECHNIKSOLIDWALL01

The functions that trigger the creation of Unitechnik files are shown below.

77544a.png

77544b.png

77544c.png

77544d.png

A GIF showing when MTO Reinforcement is run and the Unitechnik file created is shown below.

77544.gif