Bracing anchors will automatically be placed in the middle between two edges if the distance between these edges is less or equal to the variable value. By default, the variable value is 1000 mm.

This variable will be added under Variables in Standard Admin. AutoCAD needs to be refreshed before the change will affect your drawings.

Figure 1: The distance between the two edges is equal to the variable value (in this case the default value of 1000 mm), and the bracing is therefore automatically repositioned in the middle.

Figure 2: The distance between the two edges is larger than the variable value (in this case the default value of 1000 mm), and the bracing is placed according to calculations.