DWGSHOWSINGLESECTIONNAMEWALL
When you are only having 2 sections in a wall element on the shop drawing, there is no lettering to indicate the sections.
With DWGSHOWSINGLESECTIONNAMEWALL set to 0 as standard the letters are missing and will only show up when there are more than 2 sections but with DWGSHOWSINGLESECTIONNAMEWALL set to 1, you get the sections defined with letters.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| DWGSHOWSINGLESECTIONNAMEWALL | 0 | 0 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| DWGSHOWSINGLESECTIONNAMEWALL | 0 | 1 |
When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run for the changed settings to take place.
The settings in Standard Admin serves as default settings when creating a new shop drawing or a new section.
Once a section is created it will have its own settings which can be different from setting in Standard Admin.
