DWGTEXTCIMANNOTATIONBACKDISTANCE

Last modified by superadmin on 2021/05/04 17:13

Writes out the CIM distance from the back.

For this to show, one of the alternatives besides "No" needs to be chosen. 

projectpropertiesbackandfront000.png

The countersinking also needs to be 0.

2.png

300 as the depth in a sandwich wall that is 340 equals the same distance as 40 from the back which will be shown in the annotation. 

5.png

1.png

Example of the IMPACT default setting:

VariableTypeValue
DWGTEXTCIMANNOTATIONBACKDISTANCE0, X=(distance)

DWGTEXTCIMANNOTATIONBACKDISTANCE0.png

Example with a user default setting:

VariableTypeValue
DWGTEXTCIMANNOTATIONBACKDISTANCE0WIKI Back, t=

DWGTEXTCIMANNOTATIONBACKDISTANCE1.png