DWGTEXTHEIGHTENDCAPELEVATIONWALL

Last modified by superadmin on 2021/05/04 17:10

Controls the height of the text in the labels for the wall endcaps on the elevation drawing. The value is multiplied by the drawing scale.

If the variable is not added (or the value is set to 0) then it will act as 1*scale

Example of the IMPACT default setting:

VariableTypeValue
DWGTEXTHEIGHTENDCAPELEVATIONWALL01

0endcapheightelevation.png

Example with a user default setting:

VariableTypeValue
DWGTEXTHEIGHTENDCAPELEVATIONWALL04

1endcapheightelevation.png

When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run for the changed settings to take place. 

The settings in Standard Admin serves as default settings when creating a new shop drawing or a new section.

After the change, the drawing must be redrawn or updated.

6.png

Tags:
Copyright 2024 StruSoft AB
IMPACT Wiki